Wire sensor Ordering: See ordering form on back page l Straight thermometer for measurement of temperatures in pipe-lines and containers, mounted in immersion wells, on the outside of pipelines, in gases and in machinery, e.g. in connection with bearings, in the LOW- PRESSURE RANGE. l The measuring inset is according to EN 60751. l The protective sheath is standard of Ø6×0.5 mm stainless steel, AISI 304. l The connecting wire is standard available in PUR and silicone. l The standard is without connection. (compression fitting available on request). l Response time (mean values) measured at velocities in: water at 0.4 m/s:  t 0.5 = 10 sec. -  t  0.9 = 42 sec. air at 3.0 m/s: t 0.5 = 24 sec. l Recommended measuring current: max. 2 mA. l Approvals: DNV-GL, Bureau Veritas, DNV-GL EU RO MR.