国际海洋工程网

Wire sensor

Ordering: See ordering form on back page

l Straight thermometer for measurement of temperatures in pipe-lines and

containers, mounted in immersion wells, on the outside of pipelines, in

gases and in machinery, e.g. in connection with bearings, in the LOW-

PRESSURE RANGE.

l The measuring inset is according to EN 60751.

l The protective sheath is standard of Ø6×0.5 mm stainless steel, AISI 304.

l The connecting wire is standard available in PUR and silicone.

l The standard is without connection. (compression fitting available on

request).

l Response time (mean values) measured at velocities in:

water at 0.4 m/s:  t 0.5 = 10 sec. -  t  0.9 = 42 sec.

air at 3.0 m/s: t 0.5 = 24 sec.

l Recommended measuring current: max. 2 mA.

l Approvals: DNV-GL, Bureau Veritas, DNV-GL EU RO MR.